Plumbing · Pricing

Flat rate pricing for plumbers: the 15-minute method

Flat-rate pricing means the customer hears one price before work starts: "That water heater swap is $1,975" — not "$95 an hour plus parts, however long it takes." Customers prefer it because there's no clock to watch. Shops prefer it because a fast, well-prepared tech earns more per hour instead of less. The only hard part is building prices that actually cover your costs. Here's the whole method.

Step 1: Find your true hourly cost (5 minutes)

Your labor cost is not your wage. It's your wage plus everything your wage drags behind it: payroll taxes, workers' comp, insurance, paid time off, and benefits. That add-on is called the burden, and for most small shops it runs 25–40% on top of wages.

Take your (or your lead tech's) hourly wage and multiply by 1.3 as a starting estimate. A tech at $34/hour with a 30% burden costs the shop about $44.20 for every hour on the clock — before the truck, fuel, or a single fitting.

Step 2: Count only billable hours (3 minutes)

A tech is paid for 40 hours a week but bills maybe 20–25 of them. The rest is drive time, parts runs, paperwork, estimates, and callbacks. This is the single most-skipped step in shop pricing, and skipping it is how a "$150/hour rate" still loses money.

Be honest: if your techs bill about 55% of paid hours, every billable hour has to carry the cost of the other 45% too. Your effective cost per billable hour is your burdened hourly cost divided by your billable percentage.

Step 3: Add overhead and profit (4 minutes)

Overhead is everything that isn't labor or materials on a specific job: truck payment and fuel, insurance, phones, software, marketing, the shop lease, your own salary for office work. Add up a month of it, divide by a month of billable hours, and you get your overhead per billable hour.

Then decide your profit margin — the share of the final price that is actual profit after every cost is covered. Healthy small shops commonly target 15–25%. Remember: margin and markup are different math. A 20% margin means profit is 20% of the price, so you divide your total cost by 0.80, not multiply by 1.20.

Step 4: Price the job (3 minutes)

Now a flat-rate price is just assembly: (billable hours × your loaded hourly rate) + materials, grossed up for margin. Worked example — a 50-gallon water heater replacement, using round numbers to show the math (set your own in the calculator below):

Worked example: water heater swap

Labor — 3 hrs at a loaded shop rate of $165/hr$495
Materials — heater, pan, fittings, disposal$940
Overhead share — 12% of job cost$172
Total cost to the shop$1,607
Flat-rate price at a 20% margin ($1,607 ÷ 0.80)$2,009

Quote the customer $2,009 — or a clean $1,995 — before you touch a wrench. If the job runs long, that's what the job-costing sheet is for: you adjust next time, with data.

Where shops go wrong with this

  • Pricing off the wage, not the cost. $34/hour is what the tech takes home, not what the hour costs you.
  • Counting all 40 hours as billable. Your rate has to carry the windshield time too.
  • Using markup when they mean margin. A 20% markup on cost is only a 16.7% margin on price — the gap comes straight out of profit.
  • Building the price once and never checking it. Cost a few jobs a week against actual hours. Prices drift; your costs don't send you a memo.

Do this for your twenty most common jobs and you have a price book — the thing that lets you quote in the driveway with confidence instead of doing arithmetic in your head while the customer watches.

What these jobs commonly quote at

Owners often ask how their numbers compare. Published homeowner-facing pricing guides put common plumbing jobs in these ranges (RateYourPlumber's pricing guides, checked November 2026):

JobCommonly quoted range
Drain cleaning$100–$250
Toilet replacement$250–$600
Water heater replacement$1,000–$1,800

Treat those as a sanity check, not a price list: they are national homeowner ranges, and your price has to come from your costs — the method above. If your calculated price lands far outside the range, recheck your billable hours before you recheck the market.

Run your own numbers

The free FlatRateKit calculator does this exact math with your labor rate, overhead, and margin — including what a "small" discount really does to your profit. Once the method clicks, the price book page shows how one-off prices become a book — and flat rate vs. time and materials shows what the same job looks like billed by the hour.

Try the free calculator